EVK-CC2541, BLE LaunchPad/ Development Kit, is an entire development kit for user to design Bluetooth Low Energy (BLE) application. It contains a Digimore Bluetooth module BT01-2 using TI Bluetooth low energy controller CC2541. TI CC2541 is a world-leading chip in Bluetooth Low Energy 4.0 and offers variety of peripherals such as UART, SPI, I2C and Timer. EVK-CC2541 also embeds a famous FTDI FT232R USB-UART interface chip, a High-PSRR 300mA LDO, Buttons and LEDs. The LaunchPad can let user focus on their project development and verify the project easily and rapidly.
BT01-2 Bluetooth Module with TI CC2541 - Bluetooth Ver. 4.0 low energy complaint - High Performance and ow-Power 8051 Microcontroller core with code Prefetch - In-System-Programmable Flash, 256KB - 12-Bit ADC with eight channels and configurable resolution - 21 general purpose I/O - Powerful USARTs with support for several serieal protocols - On board PCB antenna and Crystal - Module dimension: 14.8mm x 10mm |
|
FTDI FT232R - USB 2.0 full speed compatible - Entire USB protocol handled on the chip, No USB specific firmware programming required - FTDI's royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases - Data transfer rates from 300 baud to 3M baud (RS422, RS485 & RS232) at TTL levels - Transmit and receive LED drive signals - UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity - Alternative jumper deisgn to use the function of FT232R independently |
|
LDO - Fast Ultra-High-PSRR, Low-Noise 300mA CMOS LDO - 3.3V ouput voltage |
|
Mini USB Type B Connector - To PC communication - Supply main power |
|
Variety of Individual Pin Header Sections - Power source option - General purpose I/O (GPIO) - Flash programming and debugging |
|
Buttons and LEDs - Input / Ouput function control |
|
LanchPad Dimension | 55 mm x 40 mm |
© 2023 Digimore Electronics Co., Ltd. All rights reserved.