Bluetooth 4.2 & 5.0 Evaluation/ LaunchPad Module Kit

EVK-CC2640 (CC2541 also available)

Bluetooth 4.2 & 5.0 Evaluation Module kit

EVK-CC2640, BLE LaunchPad/ Development Kit, is an entire development kit for user to design Bluetooth Low Energy (BLE) application. It contains a Digimore Bluetooth module BT03-1 using TI Bluetooth low energy controller CC2640R2F. TI CC2640R2F is a world-leading chip in Bluetooth Low Energy 4.2 & 5.0 and offers variety of peripherals such as UART, SPI, I2C and Timer. EVK-CC2640 also embeds a famous FTDI FT232R USB-UART interface chip, a High-PSRR 300mA LDO, Buttons and LEDs. The LaunchPad can let user focus on their project development and verify the project easily and rapidly.


BT03-1 Bluetooth Module with TI CC2640

- Bluetooth Ver. 4.2 & 5.0 low energy complaint

- High Performance and ow-Power 8051 Microcontroller core with code Prefetch

- In-System-Programmable Flash

- 12-Bit ADC with eight channels and configurable resolution

- 21 general purpose I/O

- Powerful USARTs with support for several serieal protocols

- On board PCB antenna and Crystal

- Module dimension: 14.8mm x 10mm


- USB 2.0 full speed compatible

- Entire USB protocol handled on the chip, No USB specific firmware programming required

- FTDI's royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases

- Data transfer rates from 300 baud to 3M baud (RS422, RS485 & RS232) at TTL levels

- Transmit and receive LED drive signals

- UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd / even / mark / space / no parity

- Alternative jumper deisgn to use the function of FT232R independently


- Fast Ultra-High-PSRR, Low-Noise 300mA CMOS LDO

- 3.3V ouput voltage

Mini USB Type B Connector

- To PC communication

- Supply main power

Variety of Individual Pin Header Sections

- Power source option

- General purpose I/O (GPIO)

- Flash programming and debugging

Buttons and LEDs

- Input / Ouput function control

LanchPad Dimension 55 mm x 40 mm